If you’re rucking or doing a GORUCK event, you’re going to want to add weight to your ruck. While all weight weighs the same (10 pounds of feathers weighs the same as 10 pounds of bricks), not all weights are efficient for rucking and GORUCK.
When it comes to rucking or doing a GORUCK event, the best way to add weight to your ruck is going to be with a weight that is designed specifically to fit in your ruck in such a way that space use is minimized and securing it is maximized.
Many of our readers will be familiar with GORUCK’s Ruck Plates, which are a great choice for adding weight to your ruck. However, there’s no denying that the GORUCK Ruck Plates are spendy.
Enter, Titan Ruck Weights.
Similar in size and dimension to the longer GORUCK Ruck Plates (formerly branded as “expert” but now branded as “for the GR1“), these weights come in at HALF the price. When you’re talking about $100 for the 30# GORUCK Ruck Plate, the $50 Titan Ruck Weight is a tempting proposition.
Initial Thoughts
Weight is weight.
I don’t really care what it looks like because I’m just throwing it in my ruck and it is going to live there forever.
That said, you’ll notice from the pics that the weights are not some gloriously perfect piece of equipment. They are a cast iron weight that has been powder coated.
On one of my weights, the powder coat was a little chipped upon arrival.
And the “10” on the light weight is weirdly deformed.
But, who cares?
Could it look nicer? Sure.
Do I want to pay 2x the price for it to look nice? Not really. Because, again, it is going in the ruck and I’m not seeing it again unless I need to switch out the weight.
Does it fit?
This is perhaps the most important question. Let’s look at a few different bags.
GORUCK Rucker 2.0
The quick and dirty is that only the 10# weight will fit in the “plate pouch” of the Rucker 2.0.
That said, the 20#, 30#, and 45# will all fit in the pocket in front of the “plate pouch” just fine.
The only time I might be concerned about this placement would be at a GORUCK event where I might do bear crawls. There is the possibility that the weight might slide forward which could get dicey. But, for general rucking, it is no problem at all.
GORUCK GR1
For GR1 folks, all 4 sizes fit perfectly in the laptop compartment.
However, just like with the GORUCK Ruck Plates, there will be a little spare room as seen in the picture above.
I solve this problem by chopping up a yoga block to help fill out the space, get the weight a little higher, and add some padding to the top to protect my head if I was to ever get inverted.
5.11 Rush 12
This is a great little ruck that I hope to post a review on in the near future.
As for the Titan Ruck Weights, the 10#, 20#, and 30# all fit in the laptop compartment. The 45# Ruck Weight is a no-go in the laptop compartment and I’m not super happy with the fit of this (or any ruck weight) in the main compartment.
Recycled Firefighter Battalion 24 HR
I got one of these for the February Rucking Challenge and really like it (review forthcoming).
For the Titan Ruck Weights, the 10#, 20#, and 30# all fit just fine in the laptop compartment. The 45# was a no-go.
Since the Battalion 24 HR doesn’t have any way to secure the weight in the main compartment, it isn’t gonna work there.
Recycled Firefighter Battalion 12 HR
Here’s my review of this slick little ruck.
As for the weights, you’re good up to the 30# weight.
(Sorry, no pics because my wife has the ruck in her van.)
To buy or not to buy?
For the price, it is hard to make the jump up to GORUCK Ruck Plates when the Titan Ruck Weights are an option. At the lower price point it is much easier to pick up the entire set, which gives you lots of options.
In addition to that, at this price point you can pick up a second set of weights to share with friends that are wanting to give rucking a try.
Now, if you’re sporting a GORUCK Rucker 2.0, the question is a little tougher. Yes, GORUCK makes a Ruck Plate specifically for the Rucker. And, having it safe, secure, and high on your back in the ruck plate pouch is pretty nice. So, in that case, the 2x price might be worth the investment.
But, it still stands that 30# is 30# and the Titan Ruck Weights are at a price that is easier on the wallet.
Final Thoughts
Like I said before, I just need some weight to throw in my ruck. I don’t care what it looks like. So, for the price, these weights are a nice addition to my collection and eaiser to recommend to some of my newbie friends just looking to join in some rucking fun like the Monthly Rucking Challenges.
I’m particularly excited about the 45# weight as I plan to use it for the upcoming 1,000 Pound Ruck Challenge.
So, what do you think? Interested in picking up some Titan Ruck Weights? Got any questions? Sound off in the comments below.
Note: Titan Fitness is the Sponsor for the 1,000 Pound Ruck Challenge and provided these plates to me for review.
10 Replies to Titan Ruck Weight Review
For my training I am using a mix of the GORUCK 20# plate (in Rucker 2.0 pouch) and 2 Titan 10# plates. This allows me to load up to 40# and do “drop sets” – e.g. 2mi@40#, 2mi@30#, 4mi@20# – or otherwise tune the weight to the needs of the day. Along with the weight of water and gear: this is plenty of weight for my training purposes (I’m old and have iffy knees) and the price was perfect. If I decide to do a Tough after the Star Course, I can either continue with the mix of 20# + 10# or invest in a 30# plate.
Fritz
Could you stack three Titan 10 lb. plates in the Rucker 2.0 plate pouch?
I just picked up a Titan plate off AMAZON. I’ve yet to weigh it to see if it truly weighs 20lbs or not (alot of amazon reviews have it coming in just shy of the listed weight).
The other tip/trick I have read about online is spraying the TITAN weight with a gloss/waterproof spray paint to help prevent it from chipping and rusting during water portions of events.
One draw back of the TITAN plate is the raised numbers and letters on the plate…One review I read stated that this caused unnecessary wear inside the rucksack.
I’m almost thinking about just wrapping my TITAN ruck plate up in duct tape to help preserve it while also cutting down on wear in the rucksack.
Wrapping your 20 lb Titan Fitness plate in duck tape does two things for you:
1) It prevents excess wear to your ruck from the raised numbering and lettering
2) It adds a little extra weight and pushes it to the actual 20 lb mark
Definitely worth doing!
Pool noodles and pipe insulation are good, cheap ways to buffer the edges of your plates. With the different diameters available, you can find and cut exactly what you need for the situation.
GORUCK has renamed their ruck plates so many times at this point it’s kind of crazy. Weren’t the expert plates the shorter, thicker plates that are now the 20 lb and 30 lb Rucker plates?
Have you tried the titan plates in the Rucker 3.0? Looking to buy them both.
No. They’re gonna be too long. The pouch is made for the standard ruck plates.
For the 25L version of the Rucker 2.0
The main slot is designed for a 20lb GoRuck Rucker / RPC plate. You can fit two 10lb TitanFitness or YesForAll (Amazon) plates stacked on top of each other as a substitute.
The secondary slot will fit both the 30lb and 45lb TitanFitness or YesForAll (Amazon) plates.
I have the 25L Rucker 3.0 and can confirm that the YesForAll weights fit perfectly and securely. They are the same dimensions as the TitanFitness ones.
*Rucker 3.0*
Comments are closed.
Which GORUCK Bag Should I Buy?
GORUCK Ballistic Trainers – Long Term Review
GORUCK Weight Vest Review (with Video)
GORUCK Kydex Frame Sheet Upgrade Instructions
Which GORUCK Bag Should I Buy?
GORUCK Rucker 4.0 Review
GORUCK Simple Sandbag & Sandbag 2.0 Review
GORUCK Weight Vest Review (with Video)